MacQueen

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== 622525 ======

[[Sales|Sales]]

===== Craigslist =====

* ATL
  * BOS
  * DEN
  * DALLAS 3/7
  * HOU  - flagged
  * LA
  * MIA
  * PHIL - 3/12
  * Phoenix - 4/5
  * PIT
  * PORT

===== A43Rh dealers =====

* $53 Minnesota https://www.american-time.com/product/motor-110vac-60hz-1rpm-3watt-cw-round-shape-kt65ra-5-6/
  * $56 https://griffensclocks.com/hansen-motors/hansen-a43ra-i43ra-i43ra-1-rpm-3w/?searchid=0&search_query=a43ra
  * $50 Arizona https://timesavers.com/search.html?q=hansen

Bought 3 of [[https://timesavers.com/i-8946001-hansen-a-43ra-synchron-motor.html|these ]] from TimeSavers on 3/4/26 for $50 each.

===== A43Rh codes =====

<code>
The code A43Rh on a Hansen clock motor refers to a specific model variant in the 
Hansen Synchron series of synchronous AC timing motors, commonly used in wall 
clocks, advertising clocks, and other timekeeping devices.Breakdown of the 
Code (A43Rh)Hansen (now Hansen Corporation) uses alphanumeric codes to indicate 
motor specifications. The format is typically:A43 = Base model series  
"A" = Style A mounting (4-hole mounting plate, round gearbox, ~2" diameter × 1-3/8" deep)  
"43" = Specific geartrain/output configuration (in the 600 Series family)  
This series is for precise timing applications (1 RPM output common)

R = Rotation direction  R = Right (clockwise when viewed from the front/shaft end)  
(L would be Left/counterclockwise)

h (lowercase) = Likely a minor revision or batch/suffix code  Hansen uses lowercase 
letters (h, i, etc.) for minor updates, revisions, or production variations (e.g., 
slight gear changes, winding tweaks, or manufacturing run).  
It's not a major spec difference — often just a factory identifier.

Full Specs for A43Rh (Based on Similar A43RA Models)Speed: 1 RPM (most common for clock hands drive)
Voltage: 110V AC (standard U.S. household)
Frequency: 60 Hz
Power: 3 Watts
Rotation: Clockwise (right)
Pinion gear: Usually 10-tooth (5.5–5.6 mm diameter)
Mounting: 4 tabs/holes (Style A)
Compatible movements: Often used in Type C Hansen movements (#610, 143R, A43RA/A44RA series, 288-003, etc.)

SummaryA43Rh is essentially a Hansen Synchron A43RA-style motor (1 RPM, 110V 60Hz 3W, 
clockwise rotation, Style A mount) with a minor revision or production code "h". It's 
a direct replacement for many vintage wall clocks and advertising clocks that use Hansen 
motors.If you're replacing it, search for Hansen A43RA (or I43RA variant) — they're 
widely available (~$40–$60) from clock parts suppliers (Clockworks, Timesavers, Ronell 
Clock, Griffen's, etc.). The "h" suffix usually doesn't affect compatibility.If you have 
a photo of the motor or more markings (e.g., full label), I can confirm exact specs or 
replacement part number!

</code>
===== 2026 01 15 =====

* changed ebay name form dmacq to kotsbee
  * register usps maibox as karen burns; there are none in wheeling **NO**
  * po boxes in elm grove and downtown are $192 per year **NO**
  * much less in triadelphia ($78) but too far away (4+ miles) **NO**
  * use mail plus store in national road under name 622525 or karen burns at $10 a month

===== 2026 01 14 =====

* A bank account in wv will require registering an LLC and getting an EIN from the IRS
  * Ohio might be somewhat less in that a DBA might suffice
  * Best thing to do is add Paypal to dmacq 
  * They charge 2.99% + $0.30 per transaction.

==== Clock Second Hand ====

=== 2025 12 23 ===

* A43RA-6-76 2035
  * A does not mean much
  * 43 is output type. 43 is 10 spoke brass
  * R is rotation direction. R is clockwise 
  * A is number of mounting tabs. A means 4 tabs.
  * 6-76 means it left the Hansen factory mounted on a movement/gear train
  * 2035 is the date of manufacture. the 35 week of 2020.

=== 2025 10 23 ===

* the hand is 228 mm long; just shy of 9"
  * Creality Ender 3 3D printer has a build volume of 220 x 220 x 250 mm
  * The 8 mm difference is 0.314 inches or about 5/16" too short
  * Bambu does 256mm x 256mm x 256mm which is 10.07874 inches or 10 1/16 inches
  * A 2-56 thread refers to a specific size of screw thread, where "2" indicates the nominal diameter (approximately 0.086 inches) and "56" indicates the number of threads per inch.
  * https://en.wikipedia.org/wiki/Tap_and_die

Materials
  * FDM - plastic 60
  * SLA - resin (brittle) 15
  * SLM - metal 25
  * SLS rough nylon 5
  * MTF - nylon 7

Printers
  * Sculpteo - SLS Nylon PA12
  * Protolabs - wanted sign up
  * Fictiv - wanted signup
  * BakerIndustries - wanted signup
  * xometry - wanted signup
  * hubs.com - try again
  * rapiddirect - does not do .st
  * RapidMade - wanted sign up
  * https://jlc3dp.com - 1 cm minimum thickness. check sheet metal
  * jawstec (idaho) - long lead times. metal is $60
  * fathommfg - wanted signup

===== 2025 11 19 =====

* Ordered 100 motors from Hansen. delivery 2/3/2026
  * Mail Center on National Road is $10 a month with three month minimum. No automatic notification.
  * Bridgeport Post Office is 300 S Lincoln Ave, Bridgeport, OH 43912. 740-635-1461. $44 for 6 months. No informed delivery for business. https://tools.usps.com/locations/details/1355816
  * Unified Bank is 325 Howard St #1123, Bridgeport, OH 43912. 740 635 0494. https://unifiedbank.com/business/business-checking
  * Priority Mail includes a flat-rate option while Ground Advantage pricing is based on weight and distance.  
  * USPS prices: https://pe.usps.com/text/dmm300/Notice123.htm
  * 4-40 = .112"
  * 3-48 = .099"
  * 2-56 = .086"
  * 1-72 = .073
  * 0-80 = .060"
  * USPS shipping: https://about.usps.com/postal-bulletin/2009/pb22265/html/info1_004.htm

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International