MacQueen

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

===== Upgrade to 13 =====

==== To Do ====

* whEnv is picking older map as loaded in log file. this is done in GdkSystem.
  * whEnv is not picking up Packaging Instructions  
  * hci is 3.21, what is sim? fix jacs error message. **DONE**
  * fix errors in whEnv and whJacs log files **DONE**
  * create progranFiles/Jas2 for 13.0.1 to keep 9.2 alive **DONE**
  * fix different versions of a single required map detected. EmconfigurationMap>>withAllRequiredMaps. **No**

==== 2025 03 30 ====

* copied gdk.cat into nls
  * recopied all nls files from progFilesX86 to jas13\xls. some were missing.
  * changed vmcfg.ini for both jacs and env to use full paths for nls and xml and log errors went away.
  * sim starts but blows up on call to usingODBCMySQL in GdkServerModelManager
  * remove call to usingODBCMySQL in GdkServerModelManager

==== 2025 03 29 ====

* repackaged sim and hci after setting both versions to 3.20. no joy.
  * <code>REM this batch file creates and starts the JAS Environment System
sc create whEnv13 binpath= "C:\Progra~2\jas13\whEnv.exe -srvName whEnv -whEnv.icx -ini:vmcfg.ini -lwhEnv.log -srvWorkingDir C:\ProgramData\Jas13\env" displayname= "Jas13 Env"
sc description whEnv13 "JAS 13 Environment System"</code>

* the create name must be unique.
  * you cannot specify description= or start= on the initial line. 
  * the above works.

==== 2025 03 28 ====

* got jas dev to load.
  * created progFilesx86\jas13
  * create programData\jas13 and copied programData\Jas into it.
  * changed jacs/jasS/env.ini files
  * changed all vmfcg.ini
  * copied new xml and nls to jas13
  * the runtime zip does not have abt.exe. copied the contents of progFilesx86/VastPlatform/13.0.1
  * The Jacs and Environment images are executed by whJacs.exe and whEnv.exe respectively which are both copies of the VAST file abtntsrv.exe renamed.
  * The Sim is executed by whSim.exe which is a renamed copy of esvio.exe.
  * The Hci is exceuted by whHci.exe which is a renamed copy of abt.exe.
  * copied jas dlls from progFilesx86/jas

==== 2025 03 25 ====

* loading jas dev.
  * load z:st Refactoring Browser instead

==== 2025 03 24 ====

* hci packages ok. new hci is 39161. old is 38288
  * sim packages ok. new sim is 25261. old is 24852

==== 2025 03 23 ====

* jacs, vp  and env package ok. jacs starts. env does not. vp ?
  * new env is 6705 old is 6246. does not start
  * new jacs is 7129. old is 6720. starts.
  * new vp is 17006. old is 16252.

==== 2025 02 16 ====

* Found 9.2 32 bit config maps for WB, WK Biz Graphics, and WK Pro.
  * Many 2014 changes in these maps.
  * Probably should __not__ load Envy 13 into a 7.5 Envy.
  * To do: 
     * download vast 13 32. 
     * save the Envy library. 
     * import WB, WK Biz Graphics, and WK Pro maps
     * import last good JAS config maps.
     * update apps and required maps in Jas Dev JSO
     * load, then run

==== 2025 02 15 ====

* Tried loading latest Jas Dev JSO map into 9.2. Failed with <code>Loading the configuration map WindowBuilder Pro R3.0 SR1.00b...
Error: 356   Cannot complete the load because the source is missing for StsRegistration class>>#knownUsers 
and it must be compiled.</code>
  * This is because WB uses a license manager whose source is hidden. 
  * The bytecodes for the license manager are in the 7.5 Envy which was the basis for the upgrade to 8.6.3

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International