MacQueen

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Linksys EA 3500 ======

===== 2025 06 22 =====

* router default ip is 192.168.1.1 which cannot be gotten to from a wired 10.0.0.* network.
  * From page 45 of the manual: Connectivity -> Internet Settings -> IPV4 -> Type of Internet Connection -> Bridge Mode. Obtain IP Address Automatically.
  * After this, use new DHCP address (probably 10 something) to access router.
  * Disabled 2G which also disabled Guest.
  * Set 5G password to Lucky01!
  * All ok.

===== 2025 04 28 =====

* connected router to network switch
  * found it as Linksys01099 under "view available wifi connections"
  * connected successfully 
  * clicked properties and got the following
<code>
  * SSID:	Linksys01099
  * Protocol:	Wi-Fi 4 (802.11n)
  * Security type:	Open
  * Network band:	2.4 GHz
  * Network channel:	6
  * Link speed (Receive/Transmit):	144/130 (Mbps)
  * IPv4 address:	10.228.18.146
  * IPv4 DNS servers:	10.228.18.234
  * Manufacturer:	Broadcom
  * Description:	DW1530 Wireless-N WLAN Half-Mini Card
  * Driver version:	7.35.352.0
  * Physical address (MAC):	E0-06-E6-02-1E-D2
</code>

* connected __wirelessly__ to the router using 192.168.1.1
  * opened a browser on myrouter.local and got login screen
  * password admin worked.
  * enabled guest access with password Lucky.
  * set security to WPA2/WPA Mixed Personal with password s1u2

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International