How to Reset the Oil Change Light on a 2014 Honda CR-V Method 1: Using the Select/Reset Knob (Most Common) Turn the ignition to the ON position (do not start the engine). Press the Select/Reset knob (usually on the instrument cluster near the speedometer) repeatedly until Oil Life appears. Press and hold the Select/Reset knob for about 10 seconds until the oil life percentage and maintenance codes start blinking. Release the knob, then press and hold it again for about 5 seconds. The display should reset to 100%. Turn the ignition off, then start the engine to confirm the light is gone. Method 2: Using Steering Wheel Controls / i-MID (Some Trims) Turn the ignition to the ON position (do not start the engine). Press the Menu button on the steering wheel. Navigate to Vehicle Information → Maintenance Info (or Oil Life). Press the SOURCE button. Select Yes when asked if you want to reset. Confirm the oil life shows 100%.